Ceramica is for aircraft, marine vessels and all types of land vehicles. Ceramica has the following properties and economical advantages:

• Bright, water clear film with high adhesion to substrates.
• Enhances color and depth of gloss.
• Very hard, durable and abrasion resistant.
• Chemically resistant to fuels and lubricants.
• Outstanding weather resistance tested by both artificial weather machines and actual exposure.
• Films continue to provide protection after several years of observation.
• Ceramica has been formulated to create a nonstick surface that reduces adhesion of insects, dirt and debris.
• Greatly reduces chalking and degradation from ultraviolet light and atmospheric oxygen as well as air and rain borne pollutants.
• Prevents wear and tear on paint and expensive decals.

Our resins are used worldwide to prevent adhesion in the construction of military and commercial aircraft as well as many vehicles used for the space program.

The technical staff at Insta Finish developed the engineering techniques for the production and utilization of these resins. After many years of additional research and development, Insta Finish has made them economical and easy to use for the protection of vehicles against wear and weather.

SURFACE PREPARATION: SURFACE SHOULD BE FREE OF DIRT, WAX, OILS, OR ANY OTHER FOREIGN MATERIAL. WE SUGGEST USING NEW CAR SOLVENT TO REMOVE ANY WAX FROM THE SURFACE. APPLY Ceramica ONLY TO A COOL DRY SURFACE OUT OF DIRECT SUNLIGHT AND WINDY CONDITIONS. If the surface is “newer” then only a clay bar might be needed for surface preparation. If there are minor or light imperfections then a mild polish is suggested.

DIRECTION FOR USE: APPLY A LIBERAL AMOUNT OF MATERIAL TO A CLEAN DRY WHITE 100% COTTON CLOTH. COAT AN AREA OF CONVENIENT SIZE (APPROX. 2-3 SQ. FT) AND LET MATERIAL STAND FOR 15-20 MIN. BUFF WITH A CLEAN, DRY, 100% COTTON CLOTH TO HIGH GLOSS. REWET APPLICATOR CLOTH EVERY TIME YOU START A NEW AREA. OVERLAP SLIGHTLY AS EACH NEW SECTION IS DONE. CONTINUE IN THIS FASHION UNTIL ENTIRE SURFACE HAS BEEN COATED. WE DO RECOMMEND TWO APPLICATIONS TO GIVE YOU MAXIMUM DURABILITY, AND ENSURE THAT ANY AREAS INADVERTENTLY MISSED ARE COATED. THE APPLIED Ceramica FILM WILL BECOME CHEMICALLY INSOLUBLE IN TWELVE HOURS.

NOTE: THIS PRODUCT IS A SURFACE FINISH PROTECTOR, IF HIGHER GLOSS IS DESIRED; WE RECOMMEND USING DA SUPER CUT BEFORE APPLYING CERAMICA. THIS WILL CUT ANY OXIDATION IF NEEDED AND MAXIMIZE THE SURFACE GLOSS.